There are many tools that have made human lives way easier than we expected it to be. However, just like you need to value things before you lose them- you need to take good care of these tools to keep them working as well. The problem with mechanical tools is that they tend to wear out if they are not used regularly.
Let’s face it- we do not always need a tool we buy. And, when it’s something like a chainsaw- that we use but mostly for really major tasks- the chainsaw stays in hibernation mode for a while in the storeroom. But, if you are not using it, you have to take good care of it. This will ensure that it stays in good shape right when you need it.
Furthermore, chainsaws are not really cheap- very expensive. So, if one just wears out due to lack of proper care- the loss is quite huge. Moreover, a chainsaw comes with many different parts and you need to take separate care of each. We have got you covered if you did not know how to clean the various parts of a chainsaw.
Let’s get to cleaning a chainsaw now!
More article: Best Professional Chainsaw
How to clean a chainsaw: The Steps
1. Place it on something stable.
You may have to put in some effort to detach parts of a chainsaw. Even if strength is not required you will have to unscrew parts and you cannot risk losing the screws. As a result, first of all, you need a stable workbench or table on which you place the chainsaw.
Secondly, you have to keep the screws in a safe place so that they do not get lost.
2. Deal with the Spark Plug.
This is where the chainsaw gets its life. Therefore, it is necessary that you attend to it first. Apparently, the spark plus often gets clogged with carbon.
You have to get rid of whatever is blocking it. The reason is that it won’t work properly if it has anything stuck in the plug. Also, if the carbon is stuck in for a long time then the chainsaw may stop working at all. In such cases, the sooner you replace the spark plug, the better.
You do not want to replace a whole chainsaw just because of a dead spark plug- but if you do not take care of it early enough- you will have to.
3. Clean the Chain.
The chain is the teeth-like part that actually makes the chainsaw efficient. As you can imagine, it is one of the most important parts. There is a knob that lets you tighten or loosen up the chain.
When you want to clean the chain- you have to loosen it up and take it off the chainsaw. Now, it is just a saw without the chain.
What you have to do is put the chain in a cleaning solution. It is best if the solution is made of one gallon of water with one cup of ammonia. Then, leave the chain in the solution for a while and take it out to scrub it a bit.
You can then rinse it with fresh water. After that, just let it out for drying.
4. Time to clean the bar.
With the chain detached and drying, you can pay your attention to the bar now. You do not even have to make the process more complicated than it is. Just simply get rid of the debris that has built on the bar.
A simple rag can help you do the job. However, cold compression will definitely give better results if you can manage to do it. In order to enjoy better health of the bar- put it on backward next so that other parts get equal deterioration over time.
5. Keep the fuel tank in mind.
Once you fill-up the tank with fuel- you think you have taken care of everything. But, that’s not true. Apparently, the fuel tank needs cleaning too, and leaving unused fuel in it for too long can really harm the quality of the whole chainsaw.
Therefore, it is necessary that you empty the tank monthly. If you have kept the fuel in it for over a month- you have to clean the fuel tank itself. Take out the tank and wash it with soapy water so that the debris or fuel buildup goes away.
6. Pay attention to the Carburetor.
The carburetor itself comes with many smaller parts. You have to detach each of the parts starting from needles to diaphragms. Then, soak them in ammonia solution and scrub the debris off after a while. You have to let them dry well before putting them back on.
Any buildup in the carburetor can cause serious damage as it will hamper the direct connection between the power and the chainsaw.
7. Clean the Spark Arrestor.
The spark arrestor itself helps to keep the chainsaw in good condition. However, dirt may clog it as well over time so it needs care too. Dealing with the spark arrestor is easy as all you have to do is clear the clogs. Once you do your job- install it back in the chainsaw.
8. Clean the air filter.
The air filter itself absorbs a lot of dirt and debris to keep the chainsaw going. Therefore, you will have to make sure it is in good condition to help the chainsaw work. Just take it out and soak it in soapy water, get rid of the dirt and dry it before you use it again.
However, if it is too dirty, you can just replace it with new ones as it is not very expensive.
In conclusion
You see the cleaning process of a chainsaw is quite basic. Apparently, you do not necessarily need to buy a separate tool to clean it. However, there are different parts- parts that you were not even aware that you have to clean. Take care of each of these parts and your chainsaw will last forever
Articles: Best Gas Chainsaw For The Money
2 thoughts on “Don’t Let Dirt and Grime Slow You Down: Learn How To Clean A Chainsaw Today”
Comments are closed.